AGM.
Absorbed Glass Mat.

AGM for start-stop vehicles with idle-off, regenerative braking and frequent engine restarts. Lead-carbon plate technology delivers three times the cycle life of standard SLI, with strong charge acceptance and reliable cold cranking across repeated micro-hybrid cycles.

European LN1 to LN6 fitment. Tested to EN 50342 with over 400 endurance cycles and 8,000 micro-hybrid cycles.

Sealed AGM across the most common backup loads. From small solar home systems and security panels at 4.5 Ah to telecom cabinets, UPS strings and emergency lighting at 200 Ah.

Sealed VRLA. Maintenance-free. Multi-orientation install. Very low self-discharge and stable float voltage.

4.5 to 200 Ah across 6V and 12V. Design life five years under 20 Ah, ten years at 20 Ah and above at 25 °C in float duty. For front-terminal rack access, specify the FT series.

Deep-cycle AGM for daily charge and discharge in off-grid solar, residential inverter banks, marine house banks and shift-cycle motive equipment. Plates and grid alloy specified for cycling duty rather than cranking.

Thick positive plates, high-tin grid alloy and high-density active paste tolerate 80% depth-of-discharge across thousands of cycles. Sealed VRLA, gas-recombinant, multi-orientation install. No topping up, no off-gassing.

Eighteen models across 6V, 8V and 12V from 35 to 260 Ah. Strong charge recovery from deep cycles. Low self-discharge for long storage between shifts. Operating range −20 to 55 °C.

High-rate sealed lead-acid AGM sized for short-duration, high-current UPS discharge. Purpose-built for large data centers, UPS/EPS and emergency power systems.

Performance rated in watts per cell at the 15-minute discharge rate to 1.67 volts per cell end-of-discharge. Pick the model by required power per string, not by amp-hour capacity.

Specialized grid plate design and alloy with low internal resistance. Thin-plate construction delivers high power density for runtime windows between 5 and 30 minutes.

Front-terminal AGM for telecom cabinets, UPS and power network installs where front access matters. Ten year design life at 25 °C in float service.

Lead-calcium grid alloy with AGM separator. Front-terminal layout simplifies rack maintenance: install, connect and inspect from the cabinet face.

Sized for 19-inch and 23-inch telecom shelves and indoor UPS cabinets. 55 Ah to 200 Ah at the C10 rate, 12V.

Lead-carbon AGM for solar self-consumption and partial-state-of-charge duty — the operating window where standard AGM loses capacity within twelve to eighteen months.

Lead-carbon negative plates reduce sulfation under partial-state-of-charge operation, the duty common to solar self-consumption installs. Lower internal resistance and stronger charge acceptance than standard AGM under the same conditions. Over 2,200 cycles at 20% depth-of-discharge at 25 °C per manufacturer testing.

Sixteen models across 6V and 12V from 12 to 400 Ah at C10. Sealed VRLA, maintenance-free, multi-orientation install. Built for hybrid inverter systems, off-grid and hot-climate standby.

2V VRLA cells for large UPS banks, utility standby, telecom central office, rail and power-plant DC systems. Capacities from 100 Ah to 3,000 Ah per cell.

Thick-plate design, low-weight electrolyte, sealed post construction. Low self-discharge for long storage between installs. Design life 10 years at 25 °C in float service.